Weathergard Elastomeric Paint

Weathergard Elastomeric

Product Information Page

Odorless elastomeric acrylic polymer, water-based coating for exterior and interior surfaces.

Key Features

Product Details

Satin-finish appearance with excellent coverage for masonry, gypsum, and wood surfaces.

Technical Specifications

Coverage of 20-25 sqm per 4ltrs and 80-100 sqm per 16ltrs at 50 microns thickness. (Approximately 2 to 3 coating)

Surface Preparation

1. Surface to be painted must be dry and in sound condition, free from loose dirt, dust, oil, grease and other foreign matter

2. New Concrete must be treated with Concrete Neutralizer to reduce excess alkalinity

3. For repairing old concrete, gypsum and wood, remove old loose paint by using steel wool or steel brush then sand down using sand paper to an even surface to promote adhesion

4. Repair cracks and dents with proper patching materials like wall putty, gypsum putty, skimcoat, patching compound and glazing putty

Application

1. Stir well before using

2. Apply at package consistency. if necessary, use a maximum reduction of 1/4 litter clean water per 4-litter paint

3 Apply 3-4 coats or until film thickness is achieve

4. Allow 3-4 drying time in between coats

5. Apply only during dry and fair weather conditions

Package Detail

Type: Plastic Bucket Container

Available Volume:

1 Litter

1 Gallon ( 4 Liters)

1 Tin (16 Litters)

Color Chart

sYCWIN COATING & Wires, inc.

iMAGE BY

Other Information

Manufacturer/Distributor:

Sycwin Coating & Wires, Inc.

Where to buy:

I used Weathergard for my exterior walls and I am impressed with the results. The paint is odorless and easy to apply. Highly recommend it!

Satisfied Customer

★★★★★