Boysen Permacoat Paint

BOYSEN® Permacoat™ Latex is a 100% acrylic paint with excellent hiding and outstanding durability.

BOYSEN PERMACOAT LATEX PAINT

four orange, green, blue, and red paint rollers

Product Information Page

BOYSEN® Permacoat™ Latex is a 100% acrylic paint with excellent hiding and outstanding durability.

Key Features

a bunch of different shades of paint sitting on top of a table

Product Details

It is ideal for interior and exterior surfaces such as concrete, bricks, plaster, and drywalls. Available in Flat, Semi-Gloss and Gloss finish

Technical Specifications

For Flat finish coverage of 25-30 sqm for primer while 30-35 sqm if use as topcoat. For Gloss and Semi-gloss finish coverage of 30-35 sqm depending on surface and porosity

Surface Preparation

1. Allow new concrete to dry for 14 - 28 days under normal weather conditions before painting

2. New Concrete must be treated with Concrete Neutralizer to reduce excess alkalinity

3. If neutralizing, treat surface with a solution of 1 part BOYSEN® Masonry Neutralizer B-44 diluted in 16 parts water, applying liberally by brush or roller

4. Let dry overnight before rinsing with water to remove white crystals that form on the surface.

5. Let dry before painting. However, if the concrete has been cured for more than 28 days, there is no need for neutralizer

Surface Preparation

1. Scrape off all loose, scaling, flaking, and peeling paint manually or by using BOYSEN® Paint and Varnish Remover B-141, as necessary

2. Wash surfaces clean and completely remove chemical residue. Let it dry

3 For repainting concrete with chalky old paint, use BOYSEN® Chalk Blocker™ B-7304 as surface conditioner

4. In case of mildew infestation, treat with a bleach solution (1:3, laundry bleach to water, respectively) by swabbing or brushing. To ensure proper treatment, let stand for 24 hours before cleaning off residue. Let dry.

TINTING: Will accept BOYSEN® Latex Colors at a maximum level of ¼ Liter per 4-Liter can. Take note that B-1466 Hansa Yellow and B-1407 Toluidine Red are for interior painting only.

THINNING SOLVENT: Use as supplied. If necessary, thin with not more than ½ Liter of clean water per 4-Liter can.

CLEAN-UP SOLVENT: Water

PACKAGING: 1-Liter, 4-Liters, and 16-Liters

APPLICATION: By brush, roller, or airless spray

AVAILABLE WHITE COLORS:
B-701 Flat White
B-710 Gloss White
B-715 Semi-Gloss White

New concrete

Repainting

Information came from:

Pacific Paint Philippines,inc.